28
6 - SERVICE PROCEDURE - MAGNETIC CLUTCH
Magnetic Clutch
Removal
●
Step 7: Remove the field coil lead wire bushing
using a flat screwdriver (p.31).
●
Step 8: Remove the three field coil/compressor
screws. Then remove the field coil.
Inspection
1. If the contact surface has been damaged by
excessive heat, the armature plate and pulley
must be replaced.
2. Check the appearance of the pulley assembly.
If the pulley grooves show excessive wear due
to slippage, both the pulley and armature plate
must be replaced, The contact surfaces of the
pulley assembly must be cleaned with a
suitable solvent before reinstallation.
3. Check the field coil for a loose connector or
cracked insulation.
CAUTION!
Do not hold the field coil by the harness
Armature
plate
Pulley
assembly
Field coil
