3) beep&park
®
Utilisation (Continued)
1) Alerts Activation:
7/9
2) Sensor Diagnostic Function :
•
You will find information about faulty sensor position on the screen. E1=
1 faulty sensor, E2= 2 faulty sensors, E3= 3 faulty sensors, E4= 4 faulty
sensors. The flashing indication on the screen enables you to locate the
position on the faulty sensor
•
The loudspeaker emits a beep even if no obstacle is present, this
means that one or several sensor(s) is (are) not properly connected or
damaged.
•
In case of a problem, please refer to your approved auto technician and
ask him to check the sensors. Replacement sensors are available as
spare parts in case of shock.
3) Vehicle equipped with a Tow Bar:
•
If your vehicle is equipped with a tow bar, you will have to configure the
system so that the tow bar stops being recognized as an obstacle.
•
Configuration Phase :
Within 10 seconds, select reverse gear 5 times
in succession so that the obstacle is recorded as a permanent object.
When reverse gear is selected for the first time, the towing system must
be detected (beep, beep, beep). Reverse gear can then be selected
again 4 times in succession.
KIT N°5 :
User Guide
