How to connect a headphone
Plug headphone jack into the detector’s 3.5mm socket.
For Bluetooth headphones, connect through V1connection,
the app.
How to set Muted Volume
In addition to the Initial Volume, you can also set the sound level
you will hear after muting: Tap
or
to start the test tone.
Tap the Control Button (Mute icon will appear), then press
or
until you’ve reached your preferred sound level. Sound level
0-9 indicated in display during adjustment.
Display readings
1. If the display is dark:
a) Power is off, or;
b) A Concealed Display is connected, or;
c) Dark Mode has been enabled in the app.
2. With power on, in the absence of alerts, the current Mode will
be displayed.
3. During alerts,
a) The Mode indication will be replaced by the Bogey Count
(number of radar signals in range).
b) Signal strength indicated by a vertical bar graph.
How to set Analyzer Modes
With power on in the absence of an alert, press-and-hold the
Control Button repeatedly to step through the three available
Analyzer Modes.
N
In All-Bogeys mode , all bogeys will be reported at the Initial
Volume as soon as they are detected. Use your judgment to
decide whether or not they are threats.
N
In Logic mode , X- and K-band bogeys assessed to be too weak
to be threats will be reported at the Muted Volume. If and when
they become threats, the audio warning will increase to the
Initial Volume.
N
In Advanced Logic mode , X- and K-band bogeys the
Analyzer determines are not threatening will not be reported
at all. Threats will be reported at Initial Volume. This mode is
particularly useful in metro areas. One exception: to be failsafe,
the Analyzer will always pass extremely strong alerts along to
you for your judgment.
NOTE: In Logic mode
and Advanced Logic mode , you are
deferring to an algorithm that will assess the threat level and
report accordingly.
Be assured that the Analyzer has years of radar experience.
It always operates the receiving circuitry at maximum sensitivity,
and it knows that instant-on radar is a greater threat than ordinary
radar. Therefore it will always warn of instant-on immediately at
the Initial Volume whenever it is detected.
How to get our free app
Go to your app store and download V1connection, the app.
How to connect V1 Gen2 to your phone
Pairing: V1connection the app will automatically connect to V1
Gen2. If you are prompted to select a V1 Gen2, select the one
with the highest (least negative) RSSI value from the list. V1 Gen2’s
Bluetooth icon will turn on when the app is connected.
NOTE: The V1 Gen2 will not be shown in the list of Bluetooth
devices on your iPhone
®
, iPad
®
or iPod
®
touch.
How to get the Owner’s Manual
Download at: v1gen2.info/manual
Valentine One Generation 2 is a trademark of Valentine Research, Inc.
10280 Alliance Road
Cincinnati OH 45242
513-984-8900
800-331-3030
www.valentine1.com
