Valcourt FG00001, Owner'S Manual

Page: 29 / 44

Page 29 Owner’s Manual - L48
ENGLISH
7.4 Gas Valve
CAUTION
Sharp Edges!
Use gloves and eye protection when servicing the fireplace controls.
Notice: Always turn off gas and electrical supply to the fireplace before servicing the controls.
1. Remove the barrier screen and glass door assemblies and set them aside in a safe location.
2. It is not necessary to remove decorative glass media from the burner cover or accent glass panels
to gain access to the valve compartment.
3. Remove the front light cover. Lift the cover up and
out of the fireplace and set aside in a safe location.
4. Remove the right side liner. Remove the 5/16in hex-head screw at the top rear of the right side
panel. Pull forward on the right side liner to release it from the front retainer bracket and set aside in
a safe location. (See Liner installation instruction for more information)
5. Remove the twelve 5/16-in hex-head screws that
secure the access cover plate on the right side of
the firebox.
F
DETAIL F
E
DETAIL E
12 X
5/16"
5/16"
5/16"
2X
6. The gas valve is now accessible for checking inlet
and outlet gas pressures, flex line connections, and
wiring to the valve.
F
DETAIL F
E
DETAIL E
12 X
5/16"
5/16"
5/16"
2X