2
947700
VIP-A12 Bracket VIP-A16 Bracket
MOUNTING/CONNECTIONS
(
A
) Attach the supplied mounting bracket to a wall or a
standard single-gang electrical box using appropriate
hardware such as #8 pan head screws (not supplied).
Mount in same orientation as shown. (
B
) Attach the
5-pin female molex connector to the male molex
connector on the back of the clock.
(
C
) Connect a standard Ethernet patch cable from an
Ethernet switch into the RJ45 connector on the
VIP-A12 or VIP-A16. If PoE is not available, a PoE
mid-span injector may be used to power the clocks.
(
D
) Place the enclosure of the clock on the outside of
the upper and lower posts on the mounting bracket.
Insert screws (supplied) to hold clock securely to
bracket.
Setup
Information specific to your application will need to be
programmed into the VIP-A1X using a computer. The
PC used for programming should be connected to the
same subnet as the VIP-A1x. Setup will be done
using the IP Solutions Setup Tool. Download the latest
version of the free IP Solutions Setup Tool from the
Valcom.com web site at www.valcom.com/vipsetuptool.
TECHNICAL ASSISTANCE
When trouble is reported, verify power is being
supplied to the unit and there are no broken
connections. If a spare unit is available, substitute a
spare unit for the suspected defective unit.
Assistance in troubleshooting is available from the
factory. Call (540) 563-2000 and press 1 for Technical
Support or via email at [email protected]
When requesting assistance, you should include all
available information. It is strongly suggested that you
go to the web site and review the documentation at:
http://www.valcom.com
Valcom equipment is not field-repairable. Valcom, Inc.
maintains service facilities in Roanoke, VA. Should
repairs be necessary, attach a tag to the unit clearly
stating your company name, address, phone number,
contact person and the nature of the problem.
Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke, Va. 24019-5056
VALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of
normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or
refund of any such defective device within the warranty period, provided that:
1. inspection by Valcom, Inc. indicates the validity of the claim;
2. the defect is not the result of damage, misuse or negligence after the original shipment;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts
and labor will be applied to units defaced or physically damaged);
4. freight charges for the return of products to Valcom are prepaid;
5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labor).
This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be liable for any
anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation,
maintenance, installation, removal or use of the product. The maximum liability of Valcom under this warranty is limited to the purchase price of the
specific Product covered by the warranty.
Disclaimer.
Except for the Limited Warranty provided herein, the product is provided “as-is” without any warranty of any kind whatsoever including, without
limitation, any
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified
immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.
Headquarters:
Valcom, Inc.
5614 Hollins Road Roanoke, VA 24019-5056
Phone: (540) 563-2000 FAX: (540) 362-9800
