3
947110
First loosen the small screw securing the
retaining tab below the power input socket and
swing the retaining tab out of the way. Insert the
power adapter barrel connector into the socket,
reposition the retaining tab to hold the connector
in place and retighten the screw.
A power on/off slide switch is located on the
bottom of the panel, adjacent to the power input
connection. See Figure 1.
Network Connection
The VIP-893 has one RJ-45 network connector
on the bottom of the panel. A 10-foot Ethernet
cable is pre-connected at the factory, for
connecting directly to an Ethernet switch.
Additionally, a RJ-45 Ethernet coupler is included
to facilitate extension with an additional cable, or
the factory cable can be removed and replaced.
Setup
Initial setup of the VIP-893 will be performed
using the Valcom IP Solutions Setup Tool.
Download the latest version of the free IP
Solutions Setup Tool from the Valcom web site
at www.valcom.com/vipsetuptool.
Additional programming will be done directly in
the VIP-893 through the touch screen interface,
and via web browser interface. For further
information, please refer to documentation
available on the Valcom web site.
TECHNICAL ASSISTANCE
When trouble is reported, verify power is being
supplied to the unit and there are no broken
connections. If a spare unit is available,
substitute a spare unit for the suspected defective
unit.
Assistance in troubleshooting is available from
the factory. Call (540) 563-2000 and press 1 for
Valcom Technical Support, or visit our website at
www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA. Should repairs be necessary,
attach a tag to the unit clearly stating your
company name, address, phone number, contact
person and the nature of the problem. Send the
unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke, Va. 24019-5056
WARRANTY
Warranty information may be found on our
website at www.valcom.com/warranty.
Figure 1.
