1 947494
ISSUE 1
VIP-824A
QUAD ENHANCED NETWORKED TRUNK PORT
INTRODUCTION
The VIP-824A Quad Enhanced Networked Trunk
Port allows most loop start station ports to be
connected to a managed IP-based LAN/WAN.
SIP connectivity allows the VIP-824A to act as a
gateway device between a SIP telephone system
and the other Valcom paging systems, such as the
MultiPath.
SPECIFICATIONS
Access Methods
PBX, FXS Port
SIP
Features
RJ-45 for network connection
4 RJ-11 FXO connections
4 RJ-11 failover telephone connections
Decode Caller ID signals
Front panel activity LED
Network activity LEDs
2.5mm jack for DC power
Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
1.38 H x 6.13" W x 5.25" D
(3.50cm H x 15.6cm W x 13.33cm D)
Weight: 1.25 lbs. (0.57 kg)
Nominal Specifications
Input Impedance:
600 Ohms
Input Level:
-10dBm
Output Impedance:
600 Ohms
Output Level:
- 10dBm nominal
Nominal Power Requirements
Via back panel barrel connector:
Voltage:
24VDC
Current:
325mA
Via 802.3af PoE Ethernet Switch:
802.3af:
Class 3
Environment
Temperature:
0 to +40° C
Humidity:
0 to 85% non-precipitating
INSTALLATION
NOTE: The telephone system referred to in this
manual is the customer premise equipment
such as an electronic key system, a PBX or a
dedicated single line telephone sets. The
VIP-824A is not intended for direct or indirect
connection to the public telephone network.
When used with a customer premise telephone
system such as a key system or PBX system,
these units are interfaced to the system via a
fully protected system central office port,
which is a fully protected interface device.
Also, the host system must be configured to
disallow central office trunk conferencing in
order to prevent indirect connection to the
public network.
Summary of Contents for VIP-824A
Page 4: ...4 947494...
