2 947557
SPEAK
ER
L
ED 1
L
ED 2
-10
d
B L
INE
L
EVEL
O
UT
M
UTE
SWITCH 2
SWITCH 1
GROUND
NETW
O
RK
RES
ET
+
-
- +
RED
BLACK
Clock Mounting
Remove the side screws holding the mounting
plate/rear panel to the enclosure. Mount the plate
to the wall or a standard double-gang electrical box
using appropriate hardware such as #8 pan head
screws (not supplied
)
. After making the required
connections, reattach the enclosure to the
mounting plate, rear panel.
Speaker Mounting
Remove the screw holding the mounting bracket to
the enclosure. Mount the bracket using appropriate
hardware such as #8 pan head crews. After
making the required connections, reattach the
enclosure to the mounting bracket.
Speaker Connections
Connect the attached wire assembly from the
V-1071 to the Speaker screw connections on
the clock circuit board.
Network Connection
The VE4171-D440 has one RJ-45 network
connector on the rear panel. Connect a standard
Ethernet patch cable from the VE4171-D440 into an
Ethernet switch. If a PoE switch is not available, a
PoE mid-span injector may be used to supply
power to the clocks.
IP CLOCK/SPEAKER CONNECTIONS
Call Switch Connection
For IP Speakers using Talkback functionality, a call
switch input via screw terminals is provided.
Connect a momentary contact switch to Switch 1
and Ground.
-10 dB Line Level Out Connection
The -10dBm Line Level Out may be connected to
up to 40 Valcom Self Amplified Speakers in order to
provide additional sound reinforcement in an area
.
Mute Out Connection
The Mute Out may optionally be connected to the
mute input of Valcom audio management systems
in order to suspend locally originated audio during
intercom announcements.
LED 1 and LED 2 Connection
LED 1 (+) and LED 2 (-) is a current limited output
designed to illuminate an optional LED. The LED
is intended to provide visual indication of call
progress. The LED illumination will flash when the
call switch is pressed and will continue to flash until
the call is answered. The LED illumination will be
solid when a connection to the unit is established.
SETUP
Information specific to your application will need to
be programmed into the VIP’s using a computer.
The PC used for programming should be connected
to the same subnet as the VIP’s. Setup will be
done using the IP Solutions Setup Tool. Download
the latest version of the free IP Solutions Setup
Tool from Valcom web site at
www.valcom.com/vipsetuptool.
