background image

3

947019

Valcom Page

     Adapter

Valcom -24VDC

 Power Supply

One-Way

Amplified

Speaker

   Amplifier Detail

Screw Designations

Ring    Tip             GND -24V

T

R

-24VDC
GND

Page
Out

FIGURE 1 - TYPICAL CONNECTIONS TO VALCOM PAGE ADAPTER

FIGURE 2 - CONNECTIONS TO 25 OR 70 VOLT PAGING SYSTEM

70 Volt Amp

-24VDC

Valcom

Power

Supply

V-1095

T

R

-24VDC
GND

One-Way

Amplified

Speakers

(up to 150)

Twisted pair telephone

wire

70 Volt Speakers

 

The backbox rails sit on top of the "T" bar of the ceiling
bridge (see Figure 3).  The mounting ring rails lay on the
tile to give it support (see Figure 4).  The height of these
bars can be adjusted by loosening the wing nuts.  Attach
rails to the backbox by placing rails through the slot
provided on the backbox and securing to the backbox
with a wing nut.

TECHNICAL ASSISTANCE

When trouble is reported, verify there are no broken
connections.  Assistance in troubleshooting is available from
the factory.  Call (540) 563-2000 and press 1 for Technical
Support, or visit our website at http://www.valcom.com.

Valcom equipment is not field repairable.  Valcom, Inc.
maintains service facilities in Roanoke, VA.  Should repairs be
necessary, attach a tag to the unit clearly stating company
name, address, phone number, contact person, and the
nature of the problem.  Send the unit to:

Valcom, Inc.

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA  24019-5056

Summary of Contents for V1011MR

Page 1: ...inal Specifications Amplifier Input Impedance 600 Ohm nominal Amplifier Input Level 10dBm nominal Amplifier Output 1 Watt into 45 Ohm speaker load Power Requirements Voltage 24VDC Current 50mA Environment Temperature 0 to 50 C Humidity 0 to 85 non precipitating Dimensions Weights V 1011MR 4 Recessed Ceiling Speaker w Mounting Ring 7 8 Dia x 5 0 D 19 81cm Dia x 12 7cm D 2 4 lbs 1 09 kg V 1012BB 8 R...

Page 2: ...ed for B battery connections Connecting arrangement to 25 or 70V paging systems refer to Figure 2 Connect 25 or 70 V paging system to V 1095 as shown in V 1095 instructions Connect one output of the V 1094A to screw terminal marked Tip on the Valcom amplified speaker Connect the other output of the V 1094A to screw terminal marked Ring on the Valcom amplified speaker Connect 24VDC B battery may be...

Page 3: ... of these bars can be adjusted by loosening the wing nuts Attach rails to the backbox by placing rails through the slot provided on the backbox and securing to the backbox with a wing nut TECHNICAL ASSISTANCE When trouble is reported verify there are no broken connections Assistance in troubleshooting is available from the factory Call 540 563 2000 and press 1 for Technical Support or visit our we...

Page 4: ...ly damaged 4 freight charges for the return of products to Valcom are prepaid 5 all units out of warranty are subject to a service charge The service charge will cover minor repairs major repairs will be subject to additional charges for parts and labor This warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom Inc be liable for any anticipated ...

Reviews: