Contents
Check to make sure you have all the following components:
• Messager USB
• USB flash drive
• 12VDC power pack
• 6´ RCA cable
• 1/8
˝
Adapter
• (4) Wall mount screws
• Users manual
Installation
Step 1: Place the Messager USB on a table, shelf, or mount to the wall with the
included mounting screws.
Step 2: Connect the included RCA cable to the 8
Ω
or 600
Ω
output of the Messager
USB. Connect the other side of the RCA cable to your phone systems MOH (music-
on-hold) or P.A. systems input.
Step 3: Plug the included power pack into a standard wall outlet. Plug the other
end into the connector marked 12VDC on the rear of the Messager USB.
Step 4: Call into the phone system from an outside line and be placed on-hold
to check if volume of MOH is appropriate. Clockwise will increase the volume,
counter-clockwise will decrease the volume.
4
