947751
1
Issue 3
V-9830
One-Way Stealth Flexhorn
INTRODUCTION
The Valcom V-9830 Stealth Flexhorn is a one-way
self-amplified paging horn designed to provide
voice paging as well as background music. The
stylish enclosure provides an unobtrusive,
contemporary appearance. A volume control is
accessible on the front of the horn.
SPECIFICATIONS
Applications
Used with Valcom Page Controllers
Dimensions & Weight
9.3 "H x 15.0 "W x 5.0 "D
(23.6 cm x 38.1 cm x 12.7 cm)
Weight: 7.6 lbs (3.45 kg)
Power Requirement
-24VDC, 150mA (3 Valcom Power Units)
INSTALLATION
(Refer to Figure 1)
Using a Phillips screwdriver, remove 4
screws attaching grille to enclosure base.
Remove horn mounting bracket and horn
from enclosure base.
Mount enclosure base to wall using
appropriate hardware.
Reattach horn and bracket to enclosure
base.
Make signal and power connections to
Flexhorn (see Connections diagram).
Test Flexhorn volume levels making
adjustments before installing grille.
Install grille onto enclosure base.
Power and Signal Connections
NOTE: Do not connect this speaker directly
to a 25/70/100 Volt amplifier as damage to
both the amplifier and speaker may occur.
A V-1095 can be used to provide an interface
between a centrally amplified speaker line
and Valcom self-amplified horns
.
TECHNICAL ASSISTANCE
Assistance is available from the factory. Call
(540) 563-2000 and press 1 for Technical
Support or visit our website at
http://www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA. Should repairs be necessary,
attach a tag to the unit clearly stating company
name, address, phone number, contact person
and the nature of the problem. Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
(Tip/A) Green
(Ring/B) Red
(-24VDC) White
(GND) Black
One-Way
Amplified
Speaker
Page
Out
Valcom Page
Control
Valcom -24VDC
Power Supply
