Valcom V-2928, User Manual

Page: 2 / 25

2
INSTALLATION OF THE OPTION BOARD
The Option Board must first be installed on the Control Unit Board (See Figure 1).
WARNING: Disconnect main power before servicing.

Remove the side plate and top cover of the Control Unit and set aside.

Slide small side plate upward to provide opening for Option Board connector (See Figure 1).

Align J3 on the Option Board directly over J1 on the Control Board.

Align J4 on the Option Board directly over JP2 on the Control Board.

Press Option Board firmly in place to make sure connectors are seated properly.

Replace the top cover and side plate of the Control Unit and plug in the power supply.

Plug PC Communication Cable (included) into P1, PC Programming Port (located on the Option
Board - See Figure 1).
The V-2928 Option Board requires the use of the PC Programming Tool to access the various features it
provides.
INSTALLATION OF THE PROGRAMMING TOOL
Minimum Computer Requirements for the Valcom V-2924A Programming Tool:
Hardware:

Pentium (higher is recommended)

Hard drive with 60 Mbytes free

Mouse

64 Mbytes of RAM (more is recommended)

1 available serial communication port
Operating System:

The Programming Tool is compatible with Windows 98, ME, NT.4.0,Windows 2000 and
Windows XP, Windows 7.
Rev 2 Programming Tool is compatible with previous versions of hardware, however, the new
hardware is not compatible with previous versions of the Programming Tool.
The programming tool software is furnished on CD and must be installed to the hard drive. To install the
software:

Insert Programming Tool CD.

CD will Auto Run.

Follow on-screen instructions for full installation.

The Valcom V-2924sc Programming Tool will automatically appear in the Programs list.