Issue 2
1
947178
30 WATT SUSPENDED-RADIAL HORN
(70V) V-5331210
by
PagePac
®
INTRODUCTION
Horn speakers that produce high sound levels are
capable of covering large noisy areas.
Minimum effective mounting height for a horn is
critical. The Suspended-Radial Horn is used
when 360° sound dispersion pattern is required.
NOTE
: Speaker is provided with 10’ mounting
chain. If this is not enough, additional chain must
be acquired. See suggested mounting height for
chain requirements (Figure 2).
SPECIFICATIONS
FEATURES
• High Intelligibility
• Built-in Transformer
• 360° Radial Dispersion
Nominal Specifications
• Frequency Response: 225Hz - 14kHz
• Dispersion: 360°
• 112 dB @ 1W, 1 Meter
• 70 Volt / 30 Watt
Dimensions/Weight
• 13.0"W x 11.8"H (33.0cm x 29.9cm)
10 lbs. (4.5 kg)
Environment
• Temperature: 0 to 40°C (32 to 104°F)
• Humidity: 0 to 85%
INSTALLATION
MOUNTING
Attach the 10 foot metal chain supplied with the
horn to the post and ring on the horn base (see
Figure 1).
The device used to attach the chain to the ceiling
must withstand a 30 pound pull test, or the weight
specified by local construction or safety codes,
whichever is greater.
WIRE CONNECTIONS
A clear plastic cover protects the horn screw ter-
minals and provides strain relief for the wires.
1. Remove the two screws from the plastic cover.
2. Set volume adjustment to lowest setting.
3. Connect the (+) 70V side of the speaker wire to
terminal 2. Connect the (-) or common side of
the speaker wire to terminal 1 (see Figure 1).
4. Do not replace the plastic cover until final
power adjustments have been made.
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
