2
947175
4. Do not replace the plastic cover until final
power adjustments have been made.
FINAL POWER ADJUSTMENTS
Ensure that the speaker is set to its lowest setting
(this will prevent an excessively loud page when
first used). While a page is in process, adjust the
volume control with a screwdriver. Turn clockwise
to increase the volume (see Table 1).
TECHNICAL ASSISTANCE
When calling, have a VOM and a telephone test
set available and call from the job site. Call (540)
427-3900 and ask for PagePac Technical Sup-
port, or call (540) 427-6000 for Valcom 24-hour
Automated Support or visit our websites at
http://www.pagepac.com and www.valcom.com.
Should repairs be necessary, attach a tag to the
unit clearly stating company name, address,
phone number, contact person, and the nature of
the problem. Send the unit to:
PagePac
®
Repair Dept.
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019-5056
FIGURE 1
FIGURE 2
MOUNTING ON FLAT SURFACE
WING NUT
MOUNTING BRACKET
ANDING
OT
ED)
TAPERED
LOCKING
PIN
S PE AKER CA BLE
VOLUME LEVEL
C O N T R O L
(USE ONLY SETTINGS
1 TO 4)
T E RMI NA LS
Table 1: SWITCH SETTINGS
SWITCH
SETTINGS
IMPEDANCE
OHMS
3.4 Vrms Input
POWER SPL
WATTS DECIBELS
1
720
0.016
89
2
180
0.063
95
3
45
0.25
101
4
11.5
1.0
107
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
