VTM-91-772/C
-5-
SECTION 2
OPERATION
2-1.
INTRODUCTION
This chapter provides operating instructions for the antenna.
2-2.
CONTROLS AND INDICATORS
The antenna contains no controls or indicators.
2-3.
OPERATING PROCEDURES
2-3.1 Operator Turn-On. No operator turn-on procedures apply since no power is required to
operate the antenna. However, the antenna is coupled to RF equipment (transmitter/receiver) and
to associated systems which may require energizing. For operating instructions, consult the
appropriate technical manuals.
2-3.2
Modes of Operation. The antenna operated automatically, and no operator intervention is
required other than interconnecting various associated equipment with the antenna.
2-3.3
Operation Under Interfering Conditions. No additional or alternate instructions are necessary
to operate the antenna under interfering conditions.
2-3.4
Operator Turn-off. Since no power is required to operate the antenna, no operator turn-off
is required. However, the specific equipment connected to the antenna may require operator turn-
off. Consult the associated technical manuals for turn-off procedures.
2-3.5
Emergency Operation. No additional or alternate steps are necessary to operate the antenna
under emergency conditions.
2-3.6
Emergency Turn-off. The antenna requires no emergency turn-off. For emergency turn-off
of specific equipment connected to the antenna, consult the associated technical manuals.
