FOLDING YOUR STROLLER
A.
Swivel the wheels so that they
are facing the rear (normal
walking position).
B.
Fold the hoods so that they are
resting closed against the
stroller frame.
C.
Adjust each seat to the fully
upright position.
D.
Lift each frame lock in turn with
your foot.
E.
Press down on the secondary
lock with your foot while
simultaneously pushing the
handles slightly forward.
F.
Push the handles forward all the
way down to the floor.
HINT: You can also pull the legs
upward toward you to meet the
handles.
G.
Engage the locking clamp,
hooking it over the central
stroller leg.
H.
Your VALCO pram is fitted with a 5 point safety harness system.
TO SECURE YOUR CHILD IN THE HARNESS:
1.
Insert Buckles (A) and (B) into either side of the Buckle Housing (C). Keep inserting until
they click into place securely.
2.
Carefully adjust the harness straps to snugly fit your child by adjusting the Sliders (D)
located on all Shoulder Straps, Waist Straps and Crotch Strap.
The harness should be snugly fitted to the baby’s body, tight enough so that the baby cannot
wriggle itself free of the straps but loose enough so as not to cause the baby any discomfort.
TO OPEN THE HARNESS
:
1.
Release the Buckle Prongs – Squeeze on the top and bottom prongs simultaneously and
pull apart from the Buckle Housing.
This process may be difficult as your buckle system has been designed to meet very
stringent safety standards to ensure that a child cannot release the harness unaided.
A.
To Recline, simutaneously press down on the two seat adjustor buttons
on either side, at the rear of each seat.
B.
Gently ease the seat backward to desired position.
C.
To raise the seat, place one hand into the center of the seat back and
firmly push upward to the desired position.
NOTE: Never adjust the seat while a child is seated in it
.
ADJUSTING EACH SEAT
USING YOUR HARNESS
