background image

Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this 

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all 

the warnings and safety guidelines before use. 

Important: Please read the following instructions carefully before assembling this product. Retain this 

guide in a safe place for future reference. 

PRODUCT REFERENCE GUIDE

© Copyright VE 2009

Due to our policy of continuous product 

development, this product is constantly 

evolving. It is possible that some 

features or procedures outlined here 

have changed since this document 

was written. If you are unsure of any 

procedure shown here, please contact 

us via the web at 

[email protected]

 

to obtain the most up to date information 

before use. Include the batch number, 

which can be found on a sticker on the 

frame.

All pictures and diagrams herein are 

provided for illustration purposes only.  

Actual product, color or fabric may vary. 

Valco Baby reserves the right to modify 

or alter any specification or colour 

without notice or obligation to modify any 

product previously purchased

FURTHER INFORMATION

In Australia/New Zealand

www.valco.com.au

www.valco.co.nz

In North America only

www.valcobaby.com

1800 610 7850

TRIMODE 

TWIN EX 

STOLLER

Summary of Contents for TRIMODE









Reviews: