FIGURE E
7. Push down on the seat firmly until you feel the locking
uprights click into place.
8. Pass each security strap up and over the infant car
seat. Click and engage the buckle in the corresponding
housing and tighten by pulling the adjusting strap.
IMPORTANT NOTE: ALWAyS TEST THAT THE SEAT IS
SECURELy ENGAGED By PULLING UP ON IT SLIGHTLy
FIGURE F - REMOVING THE SEAT
9. Release the security straps by squeezing firmly on either
side of the buckle to release.
squeeze
10. Release the seat catch in the same manner as you
would release the seat from the car, by pushing the
release buttons on either side at the top of the car seat
and lifting it smoothly upward at 90°.
FIGURE G - REMOVING THE ADAPTOR
11. To remove the adaptor from the chassis, press the
realease buttons found on the rear of the adpator
housing and lift up the adaptor free of the chassis.
F
E
G
click
LIFT
PUSH
PUSH
LIFT
PUSH
LIFT
PUSH
LIFT
PUSH
LIFT
click
tighten
