VALBERG WF 612 D DS701T, Instructions For Use Manual

Page: 40 / 150

37 EN
Useful information
C
The washing machine is equipped with a self-diagnostic system that provides the error code
using the wash cycle indicator lights. The most common error codes are listed in the table below.
Fault code Possible fault Action
Er 01
The machine
door is not closed
properly.
Close the door until you hear a click. If
the machine continues to indicate an
error, turn the machine off and unplug
it. Then immediately contact the
nearest authorised technician.
Er 02
The pressure or
water level inside
the machine may
be low.
Make sure the tap is fully open. The
mains water supply may be cut off.
If the problem persists, the machine
will automatically stop after a while.
Unplug the machine, turn off the tap
and contact the nearest authorised
technician.
Er 03
The pump or the
pump's electrical
connection is
faulty or the drain
pump filter is
clogged.
Clean the drain pump filter. If the
problem persists, contact the nearest
authorised technician.(*)
Er 04
There is too much
water in the
machine.
The machine will automatically drain
off the water. Once the water has
drained, turn off the machine and
unplug it. Turn off the tap and contact
the nearest authorised technician.
Error messages and what to do