VALBERG UF 242 E W742C, Instructions For Use Manual

Page: 15 / 58

8 FR
Utilisation de l’appareil
B
8 EN
Using the appliance
B B
Using the appliance
Electrical connection
• Before connecting the appliance, make sure that the voltage and frequency indicated on the
nameplate correspond to your domestic power supply.
• This appliance must be earthed. There is a contact in the plug for this purpose.
• If the domestic power supply is not earthed, contact a qualified electrician to connect the
appliance to a separate earthing point according to the statutory requirements for electricity
supplies.
• The manufacturer accepts no liability if the above-mentioned safety measures are not
respected.
• The appliance is compliant with European directives
Initial use
Cleaning the interior
• Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and a neutral soap to remove the characteristic odour of new products.
Dry thoroughly.
CAUTION
Do not use abrasive powders or detergents as they will
damage the finish.
Temperature setting
• Switch on your appliance.
The interior temperature is controlled by a thermostat
• There are 3 adjustments: MIN, NORMAL and MAX .
• MIN corresponds to the warmest adjustment.
• MAX corresponds to the coldest adjustment.
-Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C) : NORMAL
- Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C) : NORMAL
- Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C) : NORMAL
• The appliance may not run at the correct temperature if it is located in a particularly warm
area or if you open the door frequently.