VALBERG SBS 519 C X180C, Instructions For Use Manual

Page: 42 / 92

40 EN
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can
cause seals to stick to the cabinet and tear when you open the
door. Wash seal with a mild detergent and warm water. Rinse and
dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry
should the appliance be powered on.
Replacing the LED light:
Warning: The LED light must not be replaced by the user! If the LED
light is damaged, contact the customer helpline for assistance.
To replace the LED light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with the other
hand while pressing the connector latch.
4. Replace LED light and snap it correctly in place.
Replace the lamp
This product contains a light source of energy efficiency class G.
Light source in this product can only be replaced by qualified
professionals. Please contact after-sales service if the light source
fails. The light source shall be removed at the end of the product’s
useful life, with sorting and recycling done separately.
Cleaning and maintenance
C