VALBERG BI 1D 199 F W742C, Instructions For Use Manual

Page: 13 / 58

6 EN
Using the appliance
B
Upside down door
Tools required: Phillips screwdriver/flathead screwdriver/Allen key.
• Make sure that the appliance is unplugged and empty.
• To remove the door, the appliance must be tilted backwards. Lay the appliance on a solid
object so that it cannot slip while the opening direction of the doors is being reversed.
• All the parts that have been removed must be kept in a safe place so that the door can be
replaced.
• Do not lay the appliance down flat as this could damage the cooling system.
• We recommend that the appliance should be handled by 2 people during assembly.
Unscrew the upper hinge. Lift off the door and place it on a padded surface to prevent
scratching.
Remove the pin from the lower hinge from right to left.
Unscrew the pin from the upper hinge. Then reverse the hinge and screw in the pin on the hinge.
Replace the door and the upper left hinge. Make sure that the door is aligned horizontally
and vertically and that the seals are closed on all sides before tightening the
lower hinge. Use a spanner to tighten the hinge if necessary.
Installation
Installation kits

Guide
x 2

Guide cover
x 2

Runner
x 2

Runner cover
x 2

Short
Short screw
x 15

Long screw
x 2

Rubber seal
x 1



1
