VALBERG 966566, Instructions For Use Manual, Page: 51 / 194

44 FR
Useful information
C
Problems Possible causes Solutions
Rust stains on cutlery
The objects concerned are
not resistant to corrosion.
• Avoid putting items that
are not corrosion resistant
in the dishwasher.
You did not start a
programme immediately
after adding regenerating
salt. Salt got into the wash
cycle.
• Always run a no-load
wash programme after
adding salt.
• Do not select the Turbo
function (if available on
your model) after adding
regenerating salt.
The cover of the water
softener is loose.
• Check that the cover
of the water softener is
closed.
Impact noise from
dishwasher
A washing arm is tapping
against an object in a rack.
• Stop the programme and
rearrange the objects in the
way of the wash arm.
Clattering noise from the
dishwasher
Dishes are moving in the
dishwasher.
• Interrupt the programme
and rearrange the dishes.
Impact noise from water
pipes
This may be related to the
installation on-site or the
diameter of the pipes.
• This has no influence
on the functionality of the
dishwasher.
• If in doubt, contact a
qualified plumber.