VALBERG 14S42 D WAD929C, Instructions For Use Manual

Page: 23 / 118

42 43 EN EN
Useful information Useful information
C C
Problems Possible causes Solutions
Rust stains on cutlery
The objects concerned are
not resistant to corrosion.
• Avoid putting items that
are not corrosion resistant
in the dishwasher.
You did not start a
programme immediately
after adding regenerating
salt. Salt got into the wash
cycle.
• Always run a no-load
wash programme after
adding salt.
• Do not select the Turbo
function (if available on
your model) after adding
regenerating salt.
The cover of the water
softener is loose.
• Check that the cover
of the water softener is
closed.
Impact noise from
dishwasher
A washing arm is tapping
against an object in a rack.
• Stop the programme and
rearrange the objects in the
way of the wash arm.
Clattering noise from the
dishwasher
Dishes are moving in the
dishwasher.
• Interrupt the programme
and rearrange the dishes.
Impact noise from water
pipes
This may be related to the
installation on-site or the
diameter of the pipes.
• This has no influence
on the functionality of the
dishwasher.
• If in doubt, contact a
qualified plumber.
Problems Possible causes Solutions
The dishes are not clean
The dishes were not loaded
correctly.
• Please refer to the
chapter “Preparing and
loading dishes”.
The programme was not
powerful enough.
• Select a more intensive
programme.
Insufficient detergent has
been released.
• Use more detergent, or
change it.
Objects are blocking the
movement of the washing
arms.
• Rearrange items so that
the wash arms can rotate
freely.
The filter unit is not clean
or has not been correctly
inserted in the bottom of
the tank. This can block the
wash arm jets.
• Clean and/or insert the
filter correctly.
• Clean the wash arm jets.
Glasses are cloudy
Use of a combination of
soft water and too much
detergent.
• Use less detergent if your
water is soft and select
a shorter cycle to wash
glasses.
White spots appear on
dishes and glasses
In areas with hard water,
limescale deposits can
occur.
• Add more detergent.
Black or grey marks on
dishes
Aluminium utensils rubbed
against the dishes.
• Use a slightly abrasive
cleaner to remove these
marks.
Detergent remains in the
compartment
Dishes are blocking the
detergent compartment.
• Load the dishes correctly.