Direc
ti
on for use
Instruc
ti
on of power supply:
1. Using a built-in ba
tt
ery:
Charge mode: It can be connected to a car charger or the
USB cable, and the red indica
ti
ng light will be bright in when
charging. When the DVR is fully charged, the red indica
ti
ng
light will go out. (Note: If you use the lithium ba
tt
ery for
power supply, you will be required to press the on-o
ff
key
⑩
to switch on / o
ff
DVR recording.)
2. Power supply by a car charger:
Connect to the DVR with the car charger included. It will
record video a
ft
er the car starts and it will also stop and save
the latest sec
ti
on of recording. (Note: This func
ti
on only
works when the 5V power is plugged in)
Func
ti
on informa
ti
on:
Video / Photograph / Preview Mode and can be selected as
follows:
1. Video mode: A
ft
er pressing the power bu
tt
on to switch on /
o
ff
the DVR
⑩
or connec
ti
ng it with a car charger, the DVR
will enter into the video mode and start to record a video
automa
ti
cally (Note: SD/MMC card must be properly
inserted before use), and now red indica
ti
ng light will blink
3
ENG
