3.1
Loosen the finger
screws to adjust the
sensor angles. The
sensor rotates 180°
and
tilts 60°.
3.2
Attach the
alignment tool on the
sensor. The tool can be
positioned on either
side of the device.
3.3
Look through the
alignment tool to aim
the sensor at the
measurement point.
Tighten the finger
screws and remove the
tool.
Note!
The offset from
the tool to the sensor is
10 cm (3.94 in).
3. Aligning surface temperature sensor (FMP103 only)
Summary of Contents for TempCast FMP102
Page 1: ...M212844EN A Setup Guide VaisalaTempCast FMP102 FMP103...
Page 2: ......
