Vaisala MGP260 Series, User Manual, Page: 49 / 92

3. Select External from either the Pressure compensation mode or the Temperature
compensation mode dropdown list, and then select Save .
4. Open the Analog input 1 menu and configure the scaling of the external sensor input. See
Configuring input from external analog pressure or temperature sensor (page 47) .
7.3.4 Configuring input from external analog pressure or
temperature sensor
When you set either the Temperature compensation mode or Pressure compensation mode
to use measurement from an External sensor, you can configure the scale of the external
sensor input in the Analog input 1 menu.
The Input mode and Input parameter selections are set automatically based on the external
compensation parameter selection.
Figure 21 Analog input 1 configuration menu in Insight
1. In the Measurement menu, set either the pressure or temperature compensation mode as
External to use input from a connected sensor. See Using compensation received from
external temperature or pressure sensor (page 46) .
You can receive the compensation value from an external sensor for only one
parameter (temperature or pressure) at a time.
2. Store the setting with Save .
3. In the Analog input 1 menu, enter the scaling for the temperature or pressure input from
the external sensor.
Chapter 7 – Environmental compensation
47
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:029-88186182 Web:www.xavery.cn Email:sxvery@163.com