MD30 maintenance
1
2
3
1
Surface state sensor
2
Surface temperature sensor MT10
3
Air temperature and humidity sensor HMP113
Table 1 MD30 maintenance
Task
Frequency
Preventive maintenance
Check error messages
−
Clean surface state sensor window
As needed
Clean surface temperature sensor
Annually
Replace filter of air temperature and humidity sensor
Annually
Perform 3-step calibration (clean, adjust with plate, drive on dry road)
Annually
Repair maintenance
Replace air temperature and humidity sensor
As needed
Replace surface temperature sensor
As needed
For MD30 instructions, including documents and videos, see
https://www.vaisala.com/en/support/md30
.
M212309EN-C
Reference
Guide
Maintenance and Troubleshooting
Vaisala Mobile Detector MD30
PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21
FI-01670 Vantaa, Finland
© Vaisala Oyj 2020
All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners.
Any reproduction, transfer, distribution or storage of information contained in this document is strictly
prohibited. All specifications — technical included — are subject to change without notice.
