Removing and Fastening the Probe
M211488EN-E
47
The following numbers refer to Figure 16:
1
Locking bushing
2
Holder bushing (attached permanently to the probe)
3
HMP110D
probe
Remote Probe Model
To remove and replace a remote probe:
1
Unscrew the small sleeve at the end of the probe cable
that secures the probe in place, and pull out the probe.
2
Replace the probe and screw the small sleeve back on,
securing the probe tightly in place.
Figure 17: Remote Probe Model
The following numbers refer to Figure 17
1
Probe cable
2
Sleeve securing the probe to the cable
3
HMP110D
probe
1
2
3
1
2
3
Summary of Contents for HUMICAP HMT140
