11.0
10.0
0
0
100
110
Output clipping limit
Error level
%RH
-5
Output
(V)
Scaled output
range:
0 ... 10 V
0 ... 100 %RH
Figure 14 Overrange behavior of relative humidity measurement
The transmitter can measure humidities in excess of 100 %RH if the sensor element becomes
wet due to condensation.
2.6 Safety
The GMW80 series transmitter delivered to you has been tested for safety and approved as
shipped from the factory. Note the following precautions:
Make sure that you prepare or connect only de-energized wires.
WARNING!
Do not modify the unit or use it in ways not described in the
documentation. Improper modification or use may lead to safety hazards,
equipment damage, failure to perform according to specification, or decreased
equipment lifetime.
CAUTION!
Electrostatic Discharge (ESD) can cause immediate or latent
damage to electronic circuits. Avoid touching exposed component contacts
during installation and maintenance.
CAUTION!
GMW80 Series User Guide
M211748EN-G
20
