4
3
2
1
5
6
7
Figure 4 GMW88 transmitter parts
1
GM10 carbon dioxide measurement module
2
Screw terminals. The wiring information is printed on a label on the mounting base.
3
Transmitter cover with captive screws (4 pcs)
4
Mounting base
5
Screw holes for mounting on top and bottom of mounting base (2 screws, Ø 3.5 mm)
6
Alternative lead-through for wiring through the back (break seal, transfer cable gland here
and seal cable gland hole on bottom of transmitter)
7
Cable gland for leading the input/output cable (Ø 4 ... 8 mm) inside the enclosure
More information
‣
Installing GMW87 and GMW88 (page 26)
‣
2.2 Display
GMW80 series transmitters with the letter
D
in the model name (for example, GMW83D) are
equipped with a display.
GMW80 Series User Guide
M211748EN-G
12
