2. Use the mounting holes to attach the mounting base securely. Use at least two screws
(not included). The mounting holes are suitable for the most common European,
American, and Asian mounting boxes. The mounting base can be twisted on to pre-
mounted screws.
To avoid damaging the component board when you close the
enclosure, make sure the screw heads do not project out of the mounting
holes.
CAUTION!
Mounting bases are tailored to the individual transmitter at the
factory. If you attach several mounting bases before connecting the
transmitters, store the transmitters in their original shipping boxes, so that
you can match the serial number on the mounting base to the serial
number on the shipping box.
CAUTION!
The mounting base of the GMW87 and GMW88 models differs from other
GMW80 series models. See
Installing GMW87 and GMW88 (page 26)
.
Chapter 3 – Installation
25
