Vaisala AQT530, Configuration Manual

Page: 41 / 64

Parameter Type Range Unit Description
cal_date
Text − − Base module calibration date in
ISO 8601 format (YYYY-MM-DD)
Combination of parameter values:
• cal_day
• cal_month
• cal_year
cal_day
uint16 1 - 31 DD Base module calibration day of
month
cal_month
uint16 1 - 12 MM Base module calibration month
cal_year
uint16 2000 - 2100 YYYY Base module calibration year
Table 30 Base module monitoring parameters (read-only)
Parameter Type Range Unit Description
time
Text − − Current timestamp in ISO 8601
format
model
Text − − Device model
unit
Text − − Combination of
• Model
• Serial number
• Configuration
Table 31 Gas measurement configuration and diagnostics parameters (read-only)
Parameter Type Range Unit Description
health
uint8 0 ... 100 % Device health status
meas_state
uint8 • 0 = Gas cell
stabilization
ongoing
• 1 = Gas cell
stabilization
finished
− Gas cell stabilization status
During gas cell stabilization,
measurement values are invalid
Table 32 LPC parameters (read-only)
Parameter Type Range Unit Description
lpc_serial
Text − − Serial number of laser particle
counter ( LPC) board
Table 33 TH probe parameters (read-only)
Parameter Type Range Unit Description
hmp_serial
Text − − HMP110 serial number
Chapter 5 – CLI commands and parameters
39