Vais Technology SoundLinQ3 SL3sat Owner'S Manual Download Page 20

 

 

5. LIMITED WARRANTY.  

VAIS warrants that the PRODUCTS will be free from defects in materials and workmanship for a period of ONE (1) YEAR from the 

date of purchase. VAIS’S sole obligation under this warranty is to repair or replace at VAIS'S option, any PRODUCTS that VAIS 

shall have determined to be defective. Any replacement of parts, shall at the option of VAIS

 

and at no additional charge to the end-

user, be new or rebuilt/re-engineered replacement parts. Any replacement of PRODUCTS shall be with new or remanufactured 

equivalent PRODUCTS. The End-User is responsible for all shipping costs to VAIS, in connection with warranty service. VAIS will

 

not  be  liable  for  any  defects  arising  out  of  any  modification  of  the  PRODUCTS,  or  misuse,  neglect, 

improper  installation  not  in 

accordance with the specifications provided byVAIS, or if the  product is used in violation of any applicable local, state or federal laws. It is 
the End Users responsibility to ascertain the existence and applicability of any local laws to the operation of the PRODUCTS, in any location 
where the PRODUCTS are being used.  other causes beyond Seller's reasonable control.   

 

A.  WHO PERFORMS VAIS TECHNOLOGY'S WARRANTY COMPLIANCE.

   

VAIS Technology’s professional technical depar tment will perform VAIS warranty obligations. 

 

B.  WHAT YOU MUST DO

.   

To  obtain  warranty  performance,  you  must   take  the  PRODUCTS,  or  deliver  the  PRODUCTS  freight  prepaid,  to  a  VAIS  Technology 
Authorized  Service  Center.  If  shipped,  the  PRODUCTS  must  be  packaged  so  that  it  is  protected  from  possible  shipping  damage.  VAIS 
Technology  will  ship  the  PRODUCTS  to  you  when  warranty  performance  is  completed.  VAIS  Technology  will  pay  for  shipping  the 
PRODUCTS to you, if the product was repaired under the warranty and the Product was received by the Service Center during the warranty 
period, in which case the Product will be returned to you freight prepaid by VAIS. You must present to  the Service Center, or include with 
your  shipment,  a  dealer's  bill  of  sale,  or  other  original  evidence,  showing  the  date  and  place  of  purchase  and  describing  the  Product 
purchased to establish warranty eligibility.  Be sure to include  your return address  and a written description of the problem and a daytime 
telephone number where you can be reached should the need arise.  

SHIP TO:           

VAIS Technology  

        

  

13792 Compark Blvd, Suite 125

          Englewood, CO 

          80112 

ATTENTION:   SERVICE DEPARTMENT 

For your own protection, you should obtain a proof of delivery receipt. Return shipping (that is, shipping back to the customer following repair 
or replacement), will be paid by the Seller unless repair or replacement is determined not to be covered by the warranty. 

 

C.   WHAT  THE  WARRANTY  DOES  NOT  COVER

.  VAIS  shall  have  no  liability  or  obligation  to  Purchaser  with  respect  to  any 

PRODUCTS requiring service during the warranty period which is subjected to any of the following: abuse, improper operation, negligence, 
accident,  modification,  improper  connections,  failure  of  the  end-user  to  follow  the  operating  procedures  outlined  both  herein,  and  in  any 
user's  manual,  attempted  repair  by  non-qualified  personnel,  Company  or Association;  operation  of  the  Product  outside  of  the  pub lished 
environmental and electrical parameters, or if such Product's original identification (trademark, serial number) markings have been defaced, 
altered, or removed. VAIS excludes from warranty coverage Products which have not been sold by VAIS or an Authorized VAIS Deale r to 
the  Purchaser.  VAIS  also  excludes  from  warranty  coverage  Products  sold  outside  of  the  United  States. 

All  wires  and  connectors 

furnished with, or as part of the PRODUCTS is furnished “AS IS” (i.e., without any warranty of any kind), except where expressly 

provided otherwise in any documentation or license agreement furnished with the PRODUCTS.  

Other Items Not covered Pursuant to this Warranty:

 

1.

 

Damage occurring during shipment of the product to VAIS for repair (claims must be presented to the carrier); 

2.

 

Any cost or expense related to the removal or reinstallation of the product; 

3.

 

Any Products which have been adjusted, altered or modified without VAIS’s consent;  

4.

 

Any Products that has been determined to contain an excessive amount of dust or dirt and any product that contains any 
other contaminants including liquid or foreign objects. 

REPAIR  OR  REPLACEMENT  AS  PROVIDED  IN  THIS  WARRANTY  IS  THE  PURCHASER'S  EXCLUSIVE  WARRANTY  REMEDY. 

IMPLIED  WARRANTIES,  INCLUDING  THE  WARRANTIES  OF  MERCHANTABILITY  AND  OF  FITNESS  FOR  A  PARTICULAR 

PURPOSE, SHALL NOT EXTEND BEYOND THE DURATION OF THE APPLICABLE PARTS WARRANTY PERIOD AND NO PERSON, 

COMPANY

 

OR  ASSOCIATION  (INCLUDING  AUTHORIZED  DEALERS)  IS  AUTHORIZED  TO  ASSUME  FOR  VAIS  ANY  OTHER 

LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. 
 

D. ALL WARRANTIES EXPRESS OR IMPLIED, ARE HEREBY  DISCLAIMED BY VAIS, AND ANY  SUCH WARRANTY IS DEEMED 

VOID, IN THE EVENT THE END-USER ATTEMPTS TO MODIFY THE PRODUCT OR PRODUCTS IN ANY WAY. 

In  addition,  some  states,  do  not  allow  limitations  on  how  long  an  implied  warranty  lasts  or  the  exclusion  or  limitation  of  incidental  or 
consequential damages, so the above limitations or exclusion may  not apply to you. This warranty gives you specific legal rights and you 
may have other rights, which may vary, from state to state. 

THE ABOVE WARRANTY TERMS AND CONDITIONS ARE VALID ONLY IN 

THE U.S.A. 

IMPORTANT STEPS TO SAFEGUARD YOUR DATA AND PROPERTY

:  

Be sure to remove all third-party after market equipment, options, alterations, and attachments not warranted by VAIS Technolog y before 
sending the Product to VAIS for warranty service. 

VAIS IS NOT LIABLE FOR ANY LOSS OR DAMAGE

 

TO THESE ITEMS

 

 

 

 

 

 

20

Summary of Contents for SoundLinQ3 SL3sat






















Reviews: