manualshive.com logo in svg

Vaillant VRT 360f Operating and, Operating And Installation Manual

Share
Download
Vaillant VRT 360f Operating and Operating And Installation Manual Download Page 25

25

GB

Operating manual

 VRT 360f

 

5 Manufacturer’s 

warranty 

and liability

Vaillant warranty

  

We only grant a Vaillant manufacturers 
warranty if a suitably qualified engineer 
has installed the system in accordance 
with Vaillant instructions. The system 
owner will be granted a warranty in 
accordance with the Vaillant terms and 
conditions. All requests for 
work during the guarantee period must 
be made to Vaillant Service Solutions 
(0870 6060 777). 

6 

Recycling and disposal

Both your Valliant room temperature 
thermostat VRT 360f and its packaging 
consist mainly of recyclable raw 
materials.

Appliance

Do not dispose of your Valliant room 
temperature thermostat VRT 360f or 
any of its accessories with the household 
waste. Make sure the old appliance and 
any accessories are disposed of properly.

Works guarantee and liability 5, Recycling and disposal 6

Summary of Contents for VRT 360f Operating and

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands