manualshive.com logo in svg

Vaillant VRT 360 Operating and, Operating And Installation Manual

Share
Download
Vaillant VRT 360 Operating and Operating And Installation Manual Download Page 12

12

VRT 360

 Operating Manual

4 Operation

4.2 

Setting the current day and 
time

To set the current day and time with the 
display in normal mode, you must per-
form the following steps:
•  Press the dial until a day of the week 

starts flashing.

•  Turn the dial until you see the current 

day of the week. 
MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday

•  Press the dial. The hours start flashing. 
•  Turn the dial until you see the current 

hour.

•  Press the dial. The minutes start flash-

ing.

•  Turn the dial until you see the current 

minute.

The display switches back to normal 
mode after five seconds.
If the calendar is activated on the install-
er level (see 11.1), you can set the day, 
month and year in the same way after 
you set the time. This allows automatic 
switching from winter to summer time.

Summary of Contents for VRT 360 Operating and









































Reviews:

No comments

Brands by name

Popular brands

Load more brands