Notes on the documentation 2
0020237953_00 Installation and maintenance instructions
23
2 Notes on the
documentation
2.1 Observing other applicable
documents
▶
You must observe all the operating and
installation instructions included with the
system components.
▶
Observe the country-specific notes in
the Country Specifics appendix.
2.2 Storing documents
▶
Pass these instructions and all other
applicable documents on to the system
operator.
2.3 Applicability of the
instructions
These instructions apply only to:
Product article number
VAE 90/1 AHT
0010020781
VAE 150/1 AHT
0010020782
3 Product description
The product is an extract air fan for kit-
chens, bathrooms and WCs.
Two operating modes are possible:
–
Automatic mode
–
Manual mode
In automatic mode, the product is auto-
matically switched on and off by an air hu-
midity sensor. The limit value for the air
humidity is preset at the factory to 65% rel-
ative air humidity.
–
Adjustable air humidity: 40-90%
In manual mode, the product is switched
on and off by a light switch that is installed
on site. After switching off the product, it
first continues to run for a set overrun time
before the product switches off.
–
Adjustable overrun time: 2
–
25 minutes
The product is suitable for concealed and
surface installation.
3.1 Information on the
identification plate
Information on the
identification plate
Meaning
Read the installation
and maintenance
instructions.
Protection class II
VAE 90/1 AHT
VAE 150/1 AHT
Type designation
VAE
Extract air fan
90/150
Maximum volume
flow
/1
Unit generation
A
Axial fan impeller
H
Air humidity sensor
T
Timer for the overrun
time
p
MAX
Max. pressure in-
crease
V
MAX
Max. air volume flow
Serial number
The 7th to 16th digits
of the serial number
form the article num-
ber
3.2 CE label
The CE label shows that the products
comply with the basic requirements of the
applicable directives as stated on the iden-
tification plate.
The declaration of conformity can be
viewed at the manufacturer's site.
