Installation Manual recoVAIR/3 0020062918_03
24
a
a
c
b
e
d
Fig. 4.9 Opening and closing of the domestic ventilation unit
4.7
Mounting and Electrical Connection
of the Bypass (optional)
The bypass must be mounted in accordance with the in-
stallation scheme (see section 2.4 "Functioning") within
the outside air flow in order to bypass the domestic ven-
tilation unit.
e
Danger!
Risk of fatal electric shock from touching live
connections. Pull the mains plug before starting
to work on the device.
e
Danger!
Risk of fatal electric shock from touching live
connections. Improper electric installation may
cause accidents. Therefore it is absolutely
mandatory to have a competent person com-
plete the electric installation.
h
Note
The bypass must be first electrically connected
because the electric lines are not accessible
after the mounting.
• Open the domestic ventilation unit as described in
section 4.6.
• Remove the plug from the middle air connection by
pushing it upwards from the inside (see fig. 4.10).
Inside the bypass air connection in the domestic ventila-
tion unit, there is a 10-pole connector to which the by-
pass plug is connected.
You will find a plug in the bag in the casing wall. Pull the
plug out of the bag of the casing wall.
• Release the cable with the 10-pin connector from the
casing wall and connect the bypass plug with the con-
nector (fig. 4.10).
Fig. 4.10 Electrical connection of the bypass
4 Assembly and installation
Summary of Contents for recoVAIR/3 SERIES
Page 2: ......
Page 14: ......
Page 43: ......
Page 44: ...0020062918_03 GB 062009 Subject to alterations...
