0020213394_05 Installation and maintenance instructions
15
5.6
Installing the product
0-10 mm
▶
Orientate the product horizontally by adjusting the ad-
justable feet.
5.7
Removing the carrying straps
Danger!
Risk of injury caused by reusing the trans-
port straps
The transport straps that are attached to the
product may become brittle over time and
then tear under load.
▶
After installing the product, render all of
the retaining straps unusable.
▶
To transport the product again at a later
time, use suitable transport harnesses
instead of the attached transport straps.
▶
Once the product has been installed, cut off the carrying
straps.
5.8
Removing the front casing
1
1.
Remove the front flap on the control panel by taking
hold of the recessed handles with both hands and lift-
ing off the front flap towards you.
4x
2.
Turn the four screws by a quarter turn and lift off the
cover on the control panel towards you.
