Vaillant ecoMAX 600 Series Instructions For Use Manual Download Page 3

3

General information 1

1 General information

1.1 For your information

Thank you for choosing a Vaillant boiler. The information
given in this booklet will enable you to obtain the best
performance from your boiler.

ecoMAX 600 series

provides central heating and

domestic hot water where a separate indirect hot water
cylinder is also incorporated to the system.

The benchmark gas boiler commissioning checklist (in
the installation manual) should be completed by the
installer and/or the commissioning engineer. 
All CORGI Registered Installers carry a CORGI ID card,
and have a registration number. Both should be recorded
in the Benchmark gas boiler commissioning checklist. 
You can check your installer by calling CORGI direct on
01256 372300.
If, after reading these instructions, you have any 
questions on the operation of the boiler, please contact
either your installer or Vaillant Technical Department.

1.2 Key to symbols

Attention!
Important Note 

Note!

This symbol is used to indicate important
instructions.

• This symbol is used to indicate a required step.

1.3 Liability

Attention!
We can accept no liability whatsoever for dama-
ge or injury resulting from failure to observe

these instructions.

1.4 Specified use

Vaillant ecoMAX appliances are made to fulfil the latest
technical specifications and official safety regulations.
These appliances are designed as boilers for use in cen-
tral heating and hot water supply systems.
If the appliances are used for purposes other than or in
excess of these specifications, this shall be classed as
incorrect operation, and neither the manufacturer nor
supplier will accept any liability for resulting damage or
injury.
Use of this type is entirely at the owner’s risk.
The term “specified use” also covers observance of the
operating and installation instructions, along with adhe-
rence to the servicing schedules.

1.5 EC designation 

The purpose of EC designation is to certify that the boi-
ler complies with the requirements of the directives
covering gasfired appliances (Council directive
90/396/EEC) and electromagnetic compatibility (Council
directive 89/336/EEC).
These appliances also comply with the requirements of
the directive on operating efficiency (Council directive
92/42/EEC).

Note!
Vaillant Ltd. support the Benchmark initiative. 
In the installation manual you will find the
Benchmark gas boiler commissioning checklist. 
It is very important that this is completed 
correctly at the time of installation and com-
missioning.

Instructions for use ecoMAX

0020014608_00GB_032006  08.03.2006 17:15 Uhr  Seite 3

Summary of Contents for ecoMAX 600 Series













Reviews: