Split Type Installation Manual
15
EN
11 Electric Wiring
11.1
Safety Precautions
Danger!
Danger of electric shock.
Before connecting the unit to the electric
supply line, ensure that the power is isolated.
Danger!
Danger of electric shock.
All electrical works should be completed by an
electrician or a similarly qualified person.
Danger!
Danger of electric shock.
Ensure that the power line is equipped with a
two or three pole isolating switch according to
the model, (single phase or three-phase) with a
distance of at least 3 mm between contacts
(Standard EN-60335-2-40).
Danger!
Danger of electric shock.
Ensure the power supply to the units is
protected by a suitably sized and rated circuit
breaker.
Danger!
Danger of electric shock.
Some units may be supplied with an European
style plug, where this does not match the local
electrical sockets only use with a suitable
adaptor or replace the plug with a UK style one
or remove and connect directly into a suitable
electrical isolator.
Danger!
Danger of electric shock.
Use wiring in accordance with the respective
local, national and international wiring
standards regarding installation in technical
electrics.
Danger!
Danger of electric shock.
Use an approved electric plug and power supply
cable.
Warning
!
Danger of breakdowns or malfunction.
All electrical wiring must be of suitable size and
rating for the appliance and should only be
installed by suitably qualified personnel.
Warning
!
Danger of breakdowns or malfunction.
Compliance with the Standard EN 61000-3-11:
Check that the nominal power of the main phase
current connection is > 100.
Warning
!
Danger of breakdowns or malfunction.
Ensure that the supplied power voltage is in the
range of 90% to 110% of the rated voltage.
Warning
!
Install the unit in such a way that the electric
plug or local isolator is easily accessible. Thus, if
required, the unit can be quickly disconnected.
Installation of the outdoor unit 10
Electric Wiring 11
