Split Type Installation Manual
3
EN
1
Your Safety
1.1
Symbols used
Danger!
Direct danger for life and health.
Danger!
Danger of electric shock.
Warning!
Potentially dangerous situation for the
product and the environment.
Note!
Useful information and indications.
1.2
Proper Use of the Unit
This unit has been designed and manufactured for
acclimatisation purposes by means of air conditioning.
The use thereof for other domestic or industrial
purposes shall be the exclusive responsibility of the
persons projecting, installing or using them in that way.
Prior to handling, installing, start up, using or
performing maintenance on the unit, the persons
assigned to perform these tasks should be familiar with
all the instructions and recommendations set forth in
the unit’s installation manual.
Note!
Keep the manuals throughout the service life
of the unit.
Note!
The information relating to this unit is
divided between two manuals: installation
manual and user manual.
Note!
This equipment contains R-410A refrigerant.
Do not vent R-410A into atmosphere: R-410A, is
a fluorinated greenhouse gas, covered by
Kyoto Protocol, with a Global Warming Potential
(GWP) = 1975.
Note!
The refrigerant fluid contained in this equipment
must be properly recovered for recycling,
reclamation or destruction before the final
disposal of the equipment.
Note!
The relevant personnel performing the
maintenance operations related with the
handling of the refrigerant fluid must have the
necessary certification issued by local
authorities.
2 Extreme Operating Conditions
This unit has been designed to operate within the range
of temperatures indicated on Figure 2.1. Ensure that
these ranges are not exceeded.
C
ALEFACCIÓN
Fig. 2.1 Operating ranges of the unit.
Legend
D.B. Temperature measured by dry bulb
3
Identification of the Unit
This manual is valid for the Split Murales series. In order
to know the specific model of your unit please refer to
the unit nameplates.
The nameplates are located on the outdoor and indoor
units.
Your Safety 1
Extreme Operating Conditions 2
Identification of the Unit 3
Indoor
Outdoor
43ºC D.B.
18ºC D.B.
18ºC D.B.
18ºC D.B.
27ºC D.B.
24ºC D.B.
-15ºC D.B.
COOLING
HEATING
27ºC D.B.
