Safety 1
0020151761_04 aroTHERM Operating instructions
5
▶
Avoid skin or eye contact with
the coolant.
▶
In the event of skin or eye
contact with the coolant, seek
medical advice.
1.2.9 Danger due to
changes to the product
environment
There is a risk of injury or
death to the user or others, or
of damage to the product and
other property, in the event
of changes to the product
environment.
Changes must not be made to
the following equipment:
–
The heat pump
–
The heat pump environment
–
The drain line and expansion
relief valve for the heating
water
–
The water and electricity sup-
ply lines
–
The heat pump's condensate
drain pipework
–
The structural conditions that
may affect the operational
safety of the product.
1.2.10 Risk of injury and
material damage due to
incorrect maintenance
or repairs
As a result of unauthorised in-
terference or tampering with the
product or parts of the system,
the operational safety of the
product can no longer be en-
sured and the guarantee there-
fore becomes void.
▶
Never interfere or tamper with
the product or other parts of
the system.
▶
Never try to carry out main-
tenance work or repairs on
the product yourself.
▶
Do not damage or remove
any seals on components.
Only qualified competent
persons and factory service
personnel are authorised to
make modifications to sealed
components.
▶
Have inspection and main-
tenance work carried out by a
competent person.
1.2.11 Frost damage due to an
unsuitable installation
site
Frost poses a risk of damage
to the product and the whole
heating installation.
▶
You should therefore ensure
that the heating installation
always remains in operation
during freezing conditions and
that all rooms are sufficiently
heated.
Even if rooms, or the whole
dwelling, are not in use for cer-
tain periods, the heating must
remain in operation.
