Vaillant 0010020639, Installation Instructions Manual

Page: 7 / 196

Troubleshooting 7
0020241666_05 Installation instructions
7
6. Inform the end user about the legionella protection
measures that have been taken.
7 Troubleshooting
7.1 Detecting and rectifying faults
▶
If problems occur whilst operating the product, check
certain points with the aid of the table in the appendix.
Detecting and rectifying faults (
→
Page 8)
7.2 Procuring spare parts
The original components of the product were also certified
by the manufacturer as part of the declaration of conformity.
If you use other, non-certified or unauthorised parts during
maintenance or repair work, this may void the conformity of
the product and it will therefore no longer comply with the
applicable standards.
We strongly recommend that you use original spare parts
from the manufacturer as this guarantees fault-free and safe
operation of the product. To receive information about the
available original spare parts, contact the contact address
provided on the back page of these instructions.
▶
If you require spare parts for maintenance or repair
work, use only the spare parts that are permitted for the
product.
8 Decommissioning
1. Disconnect the power supply, if required.
2. Close all of the isolators fitted on-site.
3. Drain the cylinder (
→
installation instructions).
4. Disconnect the connection cables.
5. Remove the cylinder and correctly dispose of the indi-
vidual components (
→
installation instructions).
9 Recycling and disposal
Disposing of the packaging
▶
Dispose of the packaging correctly.
▶
Observe all relevant regulations.
10 Customer service
The contact details for our customer service are provided in
the appendix or on our website.