4WD MANUAL
Vahva Jussi 320
2011 Kreisi Metall
4WD switch and electrics installment
1) The 4WD switch is usually fastened to the left hand of ATV handle bar(see
picture), then you can operate the throttle and 4WD simultaneously.
2) The switch wires are connected to the ATV battery pack.
YELLOW
wire is
connected to the battery
MINUS –
side and
RED
wire to the battery
PLUS +
side.
3) The wires are guided under the seat to the back end and connected to the
4WD electric section of manipulator.
4) The oil back flow whose must be connected between the hydraulic unit and
distributor. Otherwise the hydraulic engines of 4WD will be damaged. If you are
using tractor hydraulics you have to have a back flow to the oil tank.
