5
5. Remove the display’s image flexo by unattaching it from it’s blocking clamp (fig. 1) and save it in a
secure place. This flexo won’t be used anymore.
6. Touch connections must be performed like this (fig. 2): Unattach from its “OEM touch connector”
blocking clamp the “OEM Touch flexo”. Then, connect the “Wiring h kit’s flexo” to the “OEM Touch
flexo” previously released. Connect the “Additional flexo” from the kit to the “OEM Touch connector”
blocking clamp that we have also previously released.
Connecting the sub-board to the RNS-510
Wiring harness
+
kit’s flexo
OEM Touch
connector
Additional
flexo
OEM Touch
flexo
(fig. 1)
(fig. 2)
Summary of Contents for NaviTouch Android
Page 1: ...NaviTouch Android for RNS 510 Ref NT_AND_RNS510...
Page 2: ...2 Connections diagram...
Page 12: ......
