6
dimensions
3
installation - spout and shower
Rubber
washer
Washer
Nut
Flexible pipe
Aerator
Adaptor
nut
Connecting
tube
Shower
hose
Cover
plate
Washer
Hand set
Position the spout in place , and from the
underside slide on the rubber washer,
metal washer and then the nut. Tighten
the nut to clamp on the spout.
CAUTION: Do not over tighten the nuts.
Connect the spout to the valve using
one of the flexible pipes.
Rubber
washer
Washer
Nut
Screw the connecting tube into the
cover plate and position in the hole,
from the underside slide on the rubber
washer, metal washer and then the nut.
Tighten the nut to clamp on the spout.
CAUTION: Do not over tighten the nuts.
Place the rubber washer into the cone
end of the hose and screw to the
handset, thread the other end of the
shower hose down through the cover
plate and screw on the adaptor nut.
Connect the adaptor nut to the outlet
ports on the divertor valve.
240-300mm
3/4”
164mm
232mm
55mm
63mm
3/4”
3/4”
90mm
33mm
33mm
28mm
Operating Specifications
Minimum operating pressure 0.7 bar
3/4”
67mm
1/2”
49-64mm
45mm
Diverter
3/4”
