VADO WG-095S-C Installation Manual Download Page 2

Page: 2 / 10

Important - please read

VADO reserves the right to make technical improvements and enhance the appearance of
the products included in this instruction manual.
Please read these instructions carefully before starting installation and keep for
future reference.
Remove all packaging and check the product for missing parts or damage before starting
installation.
Any alterations made to this product and fittings may infringe water regulations and will
invalidate the guarantee.
The installation must comply with all Local/National Water Supply Authority Regulations/
Byelaws and Building and Plumbing Regulations.
To be installed in accordance with BS EN806.
We strongly recommend that you use a qualified and registered plumber.

General Care and Safety

Wall plugs supplied are ONLY suitable for solid stone/brick walls. They are not suitable
for use in aerated blocks or similar. If fixing to a stud wall, sufficient extra internal
reinforcements must be made to the wall. Screws must locate into suitably reinforced studs
and noggins.
Take care using power tools - The use of a residual current device (RCD) is recommended.
Beware of hidden cables or pipes when drilling.
This product can be dangerous if installed incorrectly. This product must be installed by a
qualified plumber or installer. It is the installer's responsibility to check that the fixings are
suitable for the installation in hand.
Cistern fittings are suitable for Water pressure: 0.2 - 10 bar. Do not add caustic chemical
substances (eg containing chlorine compounds or similar into the cistern. These can
damage the valve components and cause failure.
Before starting to enclose the frame, the system must be first tested for leaks before 2nd fix
commences. Using the help of a second person to hold the pan in place on the frame, turn
on the water supply and flush the pan to check for leaks.
When installed, the fitting must comply with the requirements of the Water Supply (Water
Fittings) Regulations 1999 and Scottish Byelaws 2004.
For further information, contact the Water Regulations department of your local water
supplier (see the WRAS website www.wras.co.uk for details) or the Water Regulations
Advisory Scheme by email (info

wras.co.uk) or telephone: 01495848454.

Please take great care when installing this product not to damage its surface.
Please note if installing in an enclosed environment, access should be left for servicing and
maintenance. No costs relating to inadequate access can be accepted.

For instructions on how to side-mount the product, spares and

guarantee information please visit our website at

https://www.vado.com/sites/default/files/flush-cisterns-

install-instructions.pdf

or by scanning the QR code:

Further information

Dimensions - toilet connection

Short frameless wall hung cistern

Keep for future reference

Installation Guide

WG-095A-S-C

WATERGAMES