background image

  

6

  dimensions

  

3

  

Operating Specifications

  operation

Operating Pressure: 
Minimum operating pressure 0.5 bar
Maximum operating pressure 5 bar

Moving the mixer lever forwards will actuate the flow of water and progressively 
increase the water temperature.

69mm

2 x G1/2”

65mm

116mm

43mm

max 180 mm

88.7mm

max 50mm

125mm

max 40mm

88mm

70mm

25mm

63mm

41mm

109mm

5° - 15°

G 1-1/4”

6mm

44-45mm

38mm

Pull the vertical control 
rod up to close the 
waste outlet and push 
down to open.

Syn 110.indd   3

10/2/10   11:03:14

Summary of Contents for synergie

Page 1: ... and returns by registered means is therefore recommended Under this guarantee which is non transferable Vado will at its option repair or replace free of charge any product or replacement part found to be defective The guarantee does not extend to any consequential loss or damage After repair or replacement the relevant guarantee period will be calculated from the original date of purchase The re...

Page 2: ...upply Water Fittings Regulations 1999 Schedule 2 Section 6 G15 13 2 Before making any inlet pipe connections all supply pipes MUST be thoroughly flushed to remove debris Failure to do so could result in damage or low flow from the mixer unit Water Supply Water Fittings Regulations 1999 Schedule 2 Section 4 G13 1 The fitting of isolating valves to the inlet feeds is advised for ease of maintenance ...

Page 3: ...e mixer lever forwards will actuate the flow of water and progressively increase the water temperature 69mm 2 x G1 2 65mm 116mm 43mm max 180 mm 88 7mm max 50mm 125mm max 40mm 88mm 70mm 25mm 63mm 41mm 109mm 5 15 G 1 1 4 6mm 44 45mm 38mm Pull the vertical control rod up to close the waste outlet and push down to open Syn 110 indd 3 10 2 10 11 03 14 ...

Page 4: ...e installing your new mixer flush through the pipework to ensure removal of debris turn off the water supply Make sure that the mixer seal is in position against the mixer body Position the mixer on the basin From the underside of the basin fit the rubber washer onto the threaded rod followed by the metal washer and the locking ring Screw the locking ring up until the bolts touch the washer Tighte...

Reviews: