4
5
Valve dimensions - 100
38mm
73mm
139mm
46mm
G1/2
88mm
110mm
130mm
Valve dimensions - 100E
199mm
270mm
290mm
Page 1: ...ture reference Installation Guide where inspiration flows Vado Wedmore Road Cheddar Somerset England BS27 3EB tel 01934 744466 fax 01934 744345 aftersales vado com www vado com This instruction booklet covers models SYN 100 SYN 100E Version 1 1 9 17 ...
Page 2: ...f your local water supplier see the WRAS website www wras co uk for details or the Water Regulations Advisory Scheme by email info wras co uk or telephone 01495848454 Before making any inlet pipe connections all supply pipes MUST be thoroughly flushed to remove debris Failure to do so could result in damage or low flow from the mixer unit Water Supply Water Fittings Regulations 1999 Schedule 2 Sec...
Page 3: ...4 5 Valve dimensions 100 38mm 73mm 139mm 46mm G1 2 88mm 110mm 130mm Valve dimensions 100E 38mm 73mm 199mm 46mm G1 2 88mm 270mm 290mm ...
Page 4: ... the front and long at the back Both rods are the same for the 100E Clip together the rubber and metal washers and slide over the rods the rubber washer should be on top Screw on the nuts and tighten to clamp the mixer to the basin CAUTION Do not over tighten the nuts as this may damage the basin Connect the water supply to the inlet pipes The hot water should be connected to the front pipe and co...
